Print settings
Select this setting item from Device settings in the menu screen which appears when you select (Setup) on the HOME screen.
-
Amount of extension
Selects the amount of image that extends off the paper when printing in borderless (full).
When performing Borderless Printing, slight cropping may occur at the edges since the printed image is enlarged to fill the whole page. You can change the width to be cropped from the borders of the original image as needed.
Important
-
Settings will become ineffective in the following situations:
-
PictBridge (Wi-Fi) compliant device
-
Note
-
When performing settings from application software or the printer driver, these settings will be prioritized.
-
If printouts contain margins even though you are printing in Borderless, specifying Extended amount: Large for this setting may help solve the problem.
-
-
Auto photo fix setting
When ON is selected, you can select whether to print photos using the Exif information recorded in the image files when Default* or On is selected in printing with a PictBridge (Wi-Fi) compliant device.
* When Default is selected for the print setting on the PictBridge (Wi-Fi) compliant device, select Auto photo fix in PictBridge settings.
-
Save black ink
You can make ink last by adjusting the used amount of black ink.
-
Force ink tank selection
You can specify the ink tank to use.
-
All ink tanks
Use both color ink tank and black ink tank.
-
Color only
Use only color ink tank.
-
Black only
Use only black ink tank.
Note
-
Black only is not enabled except borderless printing for plain paper or envelope printing. For details, see below.
- Setting the Ink Usage Control (Windows)
- Setting the Ink Usage Control (macOS)
-
-
-
Print target for plain paper
Select Text only or Text and photos for plain paper printing.
Note
- As print results, if you are conscious of unevenness or textures of granularity, select Text and photos.